Anticorrosive Water Pipe Insulation Tape with Polyethylene Film and
Butyl Rubber Adhesive
water pipe insulation anti corrosion wrapping tape
AWWA C 214 C 209
Corrosion protection for gas, oil ,water steel pipe
15 mils, 20 mils, 25 mils, 30 mils, 35 mils, 40 mils, 60 mils
100 ft, 200ft, 400 ft, 600 ft, 800 ft,1000 ft
50 mm, 100 mm, 150 mm, 200 mm, 230 mm, 300 mm, 450 mm
Excellent adhesion to a wide range of substrates found, including
concrete and steel piping.
Compatible with common pipe coatings.
Endures extremes of heat and cold.
Excellent resistance to cathodic disbondment.
High water and vapour impermeability.
Polyethylene and butyl rubber
Prepare surfaces by removing all loose scale, rust or other foreign
matter by grit blasting or wire brush. Surface must be clean, dry
and free of grease.Apply thin film of Butyl Primer to all surfaces
to be wrapped and allow to dry. Peel back interleaving and apply
adhesive side of the tape to the surface and press down. Apply the
tape spirally with enough tension to make it conform. Remove
interleaving as wrapping proceeds. Overlap each turn by at least 1"
or 55% to achieve double thickness.
Irregular surfaces such as valves, flanges, etc.
Peel adhesion to primed steel pipe
More than 25 N/cm
More than 65 N/cm
More than 400%
More than 6 J
JINING XUNDA PIPE COATING MATERIALS CO.,LTD