Aluminum foil butyl rubber tape for building , waterproof pipe tape
black gray sliver color
aluminum foil butyl rubber tape is the energy efficient weatherproofing tape that helps protect
your home against costly mold problems. It is designed for roofing,
waterproofing, patching and repair or any job requiring durable,
weatherproof protection. aluminum foil butyl rubber tape can be
used anywhere you want a fast, dependable and long-term
aluminum foil butyl rubber tape Features:
Energy efficient - stops air conditioning and heat loss around
window and door openings.
Waterproofs - prevents water infiltration.
Helps to prevent costly mol problems.
Easy to apply self-adhesive tape.
Excellent bond to all common roofing materials.
Instructions for use:
Tape must only be applied to clean dry surfaces. Remove all loose
dust and dirt with a wire brush and soft broom from the area of
a.) Measure length of aluminum foil butyl rubber tape required and
cut from the roll.
b.) Peel a short length (about 4 inches) of the release film from
one end of the length of tape.
c.) Position this end (compound side down) onto the dry primed
surface and press down firmly with hand or roller.
d.) Ensure the tape is evenly pressed down avoiding creases or air
pockets. It is very important to press down the edges and ends of
e.) Continue along the length of tape peeling off approximately 8
to 12 inches of release film as application proceeds. It is
recommended that only short lengths of release film are removed at
any time to avoid contamination of the compound with dirt and dust.
It can be used for Doors & Windows , Roof Patch ,Gutter Patch,
Skylights, Valley Repair ,Metal Patch Metal Roofs, Flat Roofs,
Trucks, RV’s ,Mobile Homes, Trailers.
Besides ,it also could be used for Exposed steel pipelines
50mm x 10m, 75mm x 10m,100mm x10m, 150mm x 10m,200mm x 10m,225mm x
10m, 250mm x 10m,300mm x 10m, 450mm x 10m
Also 2.5mm,3.0mm,5.0mm,20m length is available
Modified bitumen and butyl rubber
Bond Strength To Primed Concrete
Flexibility at -15°C
Application Temperature Range
5 to 40°C
Service Temperature Range
-10 to 80°C
JINING XUNDA PIPE COATING MATERIALS CO LTD ISO CERTIFICATE
Other Hot Products