Butyl sealing tape with reinforce aluminium lamination
System Description - butyl sealing tape with reinforce aluminium
The Xunda T700 is a cold applied coating system designed for the
corrosion protection water, oil gas underground or aboveground
pipelines, protecting insulation coatings ,UV resistance and
waterproofing for the windows,roofs ,wall and other building
joints. The T700 consists of a aluminum foil or aluminum-polyester
backing laminated with butyl rubber .
System Features for butyl sealing tape
The butyl tape can also be used for outdoor applications and is
resistant to rain and all other weather conditions (not suitable
for use under water).
Compatible with Plexiglas and Macrolon
The butyl tape can be used for sealing in conservatories and
greenhouses without the fear of stress cracks forming (tested by
Excellent adhesion to absorbent and non-absorbent surfaces.
Can be used on all surfaces found in the construction field, e.g.
steel, aluminium, glass, plastic, wood, concrete, masonry, bitumen
Butyl tapes are self-fusing
The tape is fully functional immediately after application and
meets all the required properties.
The butyl tape enables waterproof sealing and prevents the
penetration of moisture into the building.
- The surfaces to be sealed must be dry, capable of bearing load and
free from grease and dust.
- The processing temperature should not be below +10°C.
- Absorbent and porous surfaces must be pre-treated with Würth
- To obtain good initial adhesion to the surface, the tape should be
pressed onto the surface and smoothed using a press-on roller or a
- Butyl has a "cold flow" tendency (flow characteristic of the tape).
Therefore, the tape should always be fitted with a press-on profile
to prevent the seal from slipping as a result of, for example, the
weight of snow or backed-up water. If the tape is fitted or
repaired without a press-on profile, there is a risk that the
sealing tape may slip.
- When using a press-on profile, the profile manufacturer's
specifications regarding the width of the butyl tape must be
- Using excessive contact pressure on the profile will cause the
sealing compound to be "pushed out". Never compress the butyl tape
to the zero point (use the supplied disc as a spacer).
- When sealing glass retainer profiles, the rubber profile may not
lie on the sealing tape. The width of the butyl tape must be
selected such that the tape is located between the rubber profiles.
|Aluminum Foil Backing Film||Aluminum-Polyester Backing Film|
|0.8mm,1.0mm,1.20mm,1.50mm or others|
|Width||50mm,100mm,150mm,225mm or others|
|Length||10m,30m,60m or others|
|Color||Sliver ,Green ,Black,Blue,Deep Red|
|Product Properties||Typical Value|
|Breaking Strength||>50N /cm|
|Adhesion Strength||>30 N/cm|
|Adhesion to||Metal , Concrete, Brick, Slate, Tile, Painted Wood, and Rigid
|Drop Down at 85℃||No dripping|
|Flexibility at -20℃||Excellent|
|Water Vapor Transmission Rate||0.2g/m2|
-30℃ - 85℃
JINING XUNDA PIPE COATING MATERIALS CO LTD FACTORY SHOW
POLYPROPYLENE FIBER REINFORCED ALUMINIUM FOIL WATERPROOF SEALING
TAPE PRODUCTION FLOW
JINING XUNDA PIPE COATING MATERIALS CO.,LTD QC
POLYPROPYLENE FIBER REINFORCED ALUMINIUM FOIL WATERPROOF SEALING
TAPE SHIPMENT SHOW
JINING XUNDA PIPE COATING MATERIALS CUSTOMER VISITING
JINING XUNDA PIPE COATING MATERIALS TRADE SHOW
JINING XUNDA PIPE COATING MATERIALS COLTD CONTACT INFORMATION
|CONTACT US AT ANY TIME|
|COMPANY NAME||JINING XUNDA PIPE COATING MATEIRALS CO.,LTD|
|ADDRESS||NO.1 JIBEI HIGH-TECH INDUSTRIAL PARK(ERSHILIPU INDUSTRIAL PARK),|
JINING CITY,SHANDONG PROVINCE,CHINA
|Cellphone No.||0086 18853777531|
JINING XUNDA PIPE COATING MATEIRALS CO.LTD COMPANY PROFILE :
Jining Xunda Pipe Coating Materials CO.,Ltd specializes in making
anticorrosion coating material for petro-chemical, Oil,Gas and
Water underground, underwater and overhead pipelines transport
system, are widely used for electricity, chemicals, construction.
Xunda company main products has: Polyethylene inner wrap adhesive
tape,Polyethylene outer wrap adhesive tape, Polyethylene Joint wrap
adhesive tape,Polyethylene 3 layer wrap adhesive tape,Polyethylene
Bitumen adhesive Tape, Polypropylene Fiber Woven Tape,Polypropylene
waterproof membrane tape, Aluminum Foil Anticorrosion Tape, Alu
Flashing tape,PVC anticorrosion pipe wrapping tape,Hot applied wrap
Our major market including 80 countries, widely distributed in
South Asia,Southeast Asia, the Middle East, Africa, Central Asia,
West Asia, North Europe, Eastern Europe, South America, Australia.
Jining Xunda Pipe Coating Materials CO.,Ltd is the most largest
manufacturer of Anti-corrosion coating material in China
A Global company supplying Polyethylene Coating Systems to the
corrosion industry within the oil, gas and water pipeline
construction industry for both onshore and offshore applications.
A manufacturer of standard and specialty products.
High-quality anti-corrosion systems providing anti-corrosion
solutions for oil pipelines, natural gas, chemicals and water
transmission and distribution pipelines, etc.
Global supplier of PE corrosion system for metallic pipelines
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based
elastomeric adhesives, Polyethylene films and liquid adhesives for
corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of
Polyethylene and Butyl Adhesive for resistance to water and oxygen
penetration. Oxygen and Water are prevented from reaching the metal
substrate, which are necessary and sufficient conditions for
Manufacture of conventional and specialty Polyethylene,
Polypropylene and Polymeric Alloys and coating systems for pipe
Manufactures PE coatings systems for applications for New Pipe
Construction and Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical
standards and norms governed within the energy and pipeline
Coating systems that have a broad range of temperature and shear
resistance properties to meet the requirements of the pipeline and
20 years of pipeline coating experience
Global presence in oil, gas and water industries
Total manufacturer of Polyethylene, Polypropylene coating systems
Innovative coatings, high temperature systems and niche coatings
with first quality products
Multiple coating systems to meet end-user applications and
Broad range of products to meet pipeline requirements
Tailor made products to specific application on demand by the
High Quality products through innovative technology, manufacturing
methodologies and first quality raw materials
ISO approved manufacturing protocol
Xunda products and coating systems approved to ASTM,DIN,AWWA and
Obtained the approval of SINOPEC, CNPC , CNOOC of China, IPC of
Iraq,CPC of Sri Lanka,MEDCO of Indonesia,SSGC of Pakistan, TGTDC
,BGSL,and JGSL of Bangladesh.
Standard manufacturing methodologies
State of the art quality control/assurance procedures and protocol
Technology/R&D programs for new products and new processes
Adaptable to manufacturing specific request within short time
Proven long-term performance and corrosion protection on operating
Coating applied in plant and over-the-ditch
Easy of application, consistent application and lower costs
Compatible with traditional and current corrosion coatings
Just-in-Time delivery on a global basis
Achieving and exceeding Client requirements for products, packaging
and shipment expectations
Meetings all International and In-Country transportation
Girth weld coating applied in Bell-hole or out of the ditch
Type of Products/ Services Offered
Anticorrosion and Mechanical Protection Tape